SIP 05689 Weldmate Pro 80A Inverter Plasma Cutter 400v
Usually Delivered Within 3 Days
Overview
- 20mm Cutting / 30,, Deverance Capacity
- 80A @ 100& Duty Cycle
- 30A - 80A Output Current
- 3 Metre Plasma Torrch
- Three Phase 400v 16amp
SIP
£997.04
Excl. Tax:
Product Code: SIP05689
Pay in 3 interest-free payments on purchases from £30-£2,000.
No sign-up fees or late fees. More Info
Specification
Description
Ideal for use in professional fabrication and engineering workshops, the SIP Weldmate Pro 80 Inverter Plasma Cutter provides a safe and easy way to cut a range of material, from mild steel, aluminum, stainless steel, brass and copper. With the ability to cut up to 20mm thickness and sever up to 30mm, the plasma cutter can be used for cutting sheet metal and also mesh metal and has two mode settings on the control panel. Mesh metal function initiates a pulsing arc effect to help achieve a continuous cutting action while sheet metal function delivery a continuous plasma arc for a smooth and precise cut.
Fitted with an adjustable air regulator, to enable a consistent supply of compressed air pressure that is required, the plasma cutter has a requirement of 90psi (6bar and air and will effectively operate from a air compressor with a 100ltr tank or above.
The compressor features a 3 metre plasma torch with Euro connector and a safety guard on the trigger to prevent accidental strike up if the torch is dropped. The control panel has the option for the torch to be used in two modes, either fully manual (2T) or semi-automatic (4T). Fully manual (2T) maintains the cutting arc while the trigger is held down while semi automatic (4T) maintains the arc by pressing and releasing the trigger, this means the trigger doesn't need to be held in continuously and is ideal for applications which require longer cuts. Air check function to test the torch air supply before cutting and will clear the torch of any debris and residual moisture for a clean arc. Adjustable pre and post air functions with a timer can also be set on the easy to use control panel.
Designed with a 4th generation Inverter, the plasma cutter delivers a high output while using 80% less energy than older inverters making it energy efficient and helping operating costs. Delivering a smooth and controlled output, the SIP Weldmate Pro 80 comes with a variable control dial.
Requires a three phase 400v 16amp supply.
Reviews
Product Questions
Specification for SIP 05689 Weldmate Pro 80A Inverter Plasma Cutter 400v
| AMPS | 80A @ 100% Duty Cycle |
|---|---|
| CE APPROVED | Yes |
| COMES WITH | 1x 3mtr plasma torch (supplied with additional electrodes, nozzles, ceramic shields and torch spanner), 1x plasma torch straight cutting guide, 1x adjustable air regulator, 1x 3mtr earth lead. |
| CUTTING CAPACITY | 20mm Cutting / 30mm Severance |
| DIMENSIONS | 395(H) x 225(W) x 525mm(D) |
| DIMENSIONS PACKAGED | 440(H) x 330(W) x 610mm(D) |
| GUARANTEE DOMESTIC | 2 Years |
| INSULATION CLASS | IP21/H |
| INTERGRATED CARRY HANDLE | Yes |
| MAX. OUTPUT AMPS | 30A - 80A |
| PRODUCT ID NO | 05689 |
| PSI PRESSURE | 87psi (6bar) |
| RATED OUTPUT VOLTAGE DC | 92v - 112v : 320v DC Open Circuit Volts |
| VOLTAGE 50HZ | 400v (16A) |
| WEIGHT | 21.7kg |
| Availability | Usually Delivered Within 3 Days |
SIP Weldmate Pro 80A Inverter Plasma Cutter
Ideal for use in professional fabrication and engineering workshops, the SIP Weldmate Pro 80 Inverter Plasma Cutter provides a safe and easy way to cut a range of material, from mild steel, aluminum, stainless steel, brass and copper. With the ability to cut up to 20mm thickness and sever up to 30mm, the plasma cutter can be used for cutting sheet metal and also mesh metal and has two mode settings on the control panel. Mesh metal function initiates a pulsing arc effect to help achieve a continuous cutting action while sheet metal function delivery a continuous plasma arc for a smooth and precise cut.
Fitted with an adjustable air regulator, to enable a consistent supply of compressed air pressure that is required, the plasma cutter has a requirement of 90psi (6bar and air and will effectively operate from a air compressor with a 100ltr tank or above.
The compressor features a 3 metre plasma torch with Euro connector and a safety guard on the trigger to prevent accidental strike up if the torch is dropped. The control panel has the option for the torch to be used in two modes, either fully manual (2T) or semi-automatic (4T). Fully manual (2T) maintains the cutting arc while the trigger is held down while semi automatic (4T) maintains the arc by pressing and releasing the trigger, this means the trigger doesn't need to be held in continuously and is ideal for applications which require longer cuts. Air check function to test the torch air supply before cutting and will clear the torch of any debris and residual moisture for a clean arc. Adjustable pre and post air functions with a timer can also be set on the easy to use control panel.
Designed with a 4th generation Inverter, the plasma cutter delivers a high output while using 80% less energy than older inverters making it energy efficient and helping operating costs. Delivering a smooth and controlled output, the SIP Weldmate Pro 80 comes with a variable control dial.
Requires a three phase 400v 16amp supply.
Customer Reviews for SIP 05689 Weldmate Pro 80A Inverter Plasma Cutter 400v
Customer Questions
